{"product_id":"doepfer-a-121d","title":"DOEPFER A-121D DUAL MULTIMODE FILTER","description":"\u003cp\u003eModule A-121d is a special dual multimode filter which can be used for parallel or serial organized dual mono filters. Even stereo applications are imaginable. The filter are based on two special circuits: one with highpass and bandpass outputs, the other with lowpass and bandpass outputs. It's a new filter design that is not used so far in any other A-100 filter module.\u003cbr\u003eWe attached great importance to the usability of the manual controls and CV inputs for dual filter applications: for the filter frequencies of both filters a common control (Frequ.) and a difference control (Delta, filter spread) are available. For both parameters even CV inputs are available (FCV, DCV). The resonance (Q1, Q2), the sensitivity of the individual frequency control input (FCV1, FCV2) and the level of the audio input (In1, In2) are adjusted by means of the individual controls for each filter.\u003cbr\u003eThe module has a simple audio mixing unit available with the inputs Mx1 and Mx2, and the output MxO. Provided that the mixer inputs are open bandpass 1 and bandpass 2 are normalled to the sockets Mx1 and Mx2. All other filter types are realized by connecting the other filter outputs (H1 = highpass 1, L2 = lowpass 2) to the mixer inputs. For details please refer to the sketches below that show all possible filter types.\u003cbr\u003eTwo or more modules can be combined to realize e.g. four or more parallel wired bandpass filters.\u003c\/p\u003e\n\u003cp\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFrequ.: master frequency control for both filters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDelta: controls the difference between the frequencies of the two filters manually (frequency spread), at center position the frequencies are about the same\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ1 \/ Q2: resonance controls for filter 1 and 2\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFCV1 \/ FCV2: attenuators for the individual frequency control inputs FCV1 (filter 1) and FCV2 (filter 2)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIn 1 \/ In 2: attenuators for the audio inputs of filter 1 and 2\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSockets:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMx1 \/ Mx2: audio inputs of the mixer, Mx1 is normalled to bandpass 1 (B1), Mx2 is normalled to bandpass 2 (B2)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMxO: audio output of the mixer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIn1 \/ In2: audio input of filter 1 and 2  (In2 is normalled to In1)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eH1: highpass output filter 1\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eL2: lowpass output filter 2\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eB2: bandpass output filter 2\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDCV: control voltage input for frequency spread (Delta)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFCV1 \/ FCV2: individual frequency control inputs, processed by the attenuators FCV1 and FCV2, socket FCV2 is normalled to socket FCV1\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFCV: common frequency control input for both filters (~ 1V\/oct)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTriangle symbols indicate the normalling of sockets (B1\u0026gt;Mx1, B2\u0026gt;Mx2, In1\u0026gt;In2, FCV\u0026gt;FCV2). The four outputs are inverse labelled.\u003c\/p\u003e\n\u003cp\u003eTechnical note:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEx factory the module is adjusted so that the resonance of the two filters does not reach self-oscillation. If desired the filters can be modified by the user by means of two trimming potentiometers so that self-oscillation is possible. That way the module can be used as a dual sine VCO. The quality of the sine shape depends upon the settings of the trimming potentiometers and may deviate clearly from the perfect sine shape with appropriate settings.\u003c\/li\u003e\n\u003cli\u003eBy means of corresponding jumpers and \"Arduino\" type wires two or more modules can be combined. In this case one of the modules is the \"master\" (MxO = common output for all modules). The other modules work as \"slaves\" (MxO outputs without function).\u003c\/li\u003e\n\u003cli\u003eThe CVD input is equipped with an internal attenuator (trimming potentiometer) to enable the adjustment of the sensitivity of the CVD inpiut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe sketches below shows the internal structure of the module as well as monophonic and duophonic filter examples.\u003c\/p\u003e\n\u003cp\u003eThe following document shows the positions and functions of the jumpers and trimming potentiometers of the module:  \u003ca href=\"file:\/\/\/Z:\/Homepage\/a100_man\/A121d_trimming_potentiometers_and_jumpers.pdf\"\u003eA121d_trimming_potentiometers_and_jumpers.pdf\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e Breite\/Width: 8 TE \/ 8 HP \/ 40.3 mm\u003cbr\u003eTiefe\/Depth: 45 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003eStrombedarf\/Current: +30 mA (+12V) \/ -30 mA (-12V)\u003c\/p\u003e","brand":"DOEPFER","offers":[{"title":"VINTAGE","offer_id":43769636389037,"sku":"","price":213.0,"currency_code":"USD","in_stock":true},{"title":"SILVER","offer_id":43769636421805,"sku":"","price":202.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/3449\/7197\/files\/A-121dV.jpg?v=1726325069","url":"https:\/\/www.detroitmodular.live\/products\/doepfer-a-121d","provider":"Detroit Modular","version":"1.0","type":"link"}