{"product_id":"doepfer-a-165-2","title":"DOEPFER A-165-2 DIGITAL MODIFIERS SLIM","description":"\u003cp\u003eModule A-165-2 includes six modification circuits for digital signals (clock, gate, trigger, start, stop etc.) which are derived from the two input signals Input 1 und 2:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einverted signal of Input 1 (labelled 1)\u003c\/li\u003e\n\u003cli\u003einverted signal of Input 2 (labelled 2)\u003c\/li\u003e\n\u003cli\u003eT flipflop (toggle flipflop), controlled by Input 1, this output changes it's state whenever a the rising edge of Input 1 appears (labelled 1\/2, as it works similar to a 1:2 frequency divider)\u003c\/li\u003e\n\u003cli\u003eSet\/Reset flipflop, this output changes it's state to \"high\" during the rising edge of Input 1 and turns \"low\" during the rising edge of Input 2 (labelled RS)\u003c\/li\u003e\n\u003cli\u003einverted output of the Set\/Reset flipflop (labelled RS)\u003c\/li\u003e\n\u003cli\u003epulse output, during both the rising and falling edge of Input 1 a short trigger pulse with about 50 ms lenght is generated (labelled with the sign ± and a rectangle pulse symbol) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe outputs 2, 1\/2, RS and the pulse output are equipped with LEDs that display the state of the output in question.\u003cbr\u003eThe output level for all six outputs can be set to 0\/+5V or 0\/+11V by means of a jumper on the pc board.\u003c\/p\u003e\n\u003cp\u003eVoltage thresholds for the input voltages:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003evoltages below +0,8 V are treated as \"low\"\u003c\/li\u003e\n\u003cli\u003evoltages above +3 V are treated as \"high\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTypical applications\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003estarting and\/or stopping of events or switching operations with the RS or RS output (e.g. controlled by the trigger outputs of a sequencer, e.g. in combination with electronic switches)\u003c\/li\u003e\n\u003cli\u003egeneration of inverted digital signals\u003c\/li\u003e\n\u003cli\u003efrequency division (1\/2 output)\u003c\/li\u003e\n\u003cli\u003egeneration of short pulses during the rising and falling edge of a digital signal (e.g. triggering an envelope at both rising and falling edge of a gate signal).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTechnical notes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe module cannot be used for bipolar signals! The negative share of the input signal will be clipped by means of a so-called clipping diode at the input of module A-165-2. This may affect the output circuitry of the module connected to the A-165-2 (depends upon the details of the output circuit and if it is protected against clipping). For the planned field of application that's normally no limitation because these signals (clock, gate, trigger) work usually only with positive voltages.\u003c\/li\u003e\n\u003cli\u003eThe module can be used for analog signals only to a limited extend! With analog signals the inputs of the module work as comparators and the negative share of the input signal is clipped (as mentioned above).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBreite\/Width: 2TE \/ 2HP \/ 10.0 mm\u003cbr\u003eTiefe\/Depth: 45 mm (gemessen ab der Rückseite der Frontplatte \/ measured from the rear side of the front panel)\u003cbr\u003eStrombedarf\/Current: +30mA (+12V) \/ -0 mA (-12V)\u003c\/p\u003e","brand":"DOEPFER","offers":[{"title":"Default Title","offer_id":44114514477229,"sku":null,"price":115.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/3449\/7197\/files\/A-165-2.jpg?v=1738431177","url":"https:\/\/www.detroitmodular.live\/products\/doepfer-a-165-2","provider":"Detroit Modular","version":"1.0","type":"link"}