{"product_id":"udo-rbn-1-c-eurorack-interface-for-rbn-1","title":"UDO RBN-1-C EURORACK INTERFACE FOR RBN-1","description":"\u003cp\u003eUDO's RBN-1-C is a Eurorack interface module for their powerfully expressive RBN-1 Performance Ribbon Controller, bringing live and loopable control optimized for performance to any Eurorack system. In a compact 6HP package, the RBN-1-C provides simple connection to the RBN-1 at the bottom of the panel. Switches at the top allow you to customize the behavior of your controller, with options for holding the most recent value and selection between absolute and relative control. The red rotary control lets you scale the volt-per-octave CV generated by the module, enabling dramatic CV depth and finely-tuned modulations alike.\u003c\/p\u003e\n\u003cp\u003eAt the bottom of the module, independent gate and CV outputs for both left and right hands allow you to use the controller duophonically, controlling multiple voices or parameters simultaneously. Adding even more depth of creative control, the RBN-1-C allows you to create looping modulations from your gestures on the RBN-1, with a trigger input for starting playback, allowing you to effortlessly create tempo-locked modulations. The RBN-1 from UDO is easily one of the most advanced ribbon controllers available, and the RBN-1-C dramatically expands those creative capabilities, inviting expressive control for Eurorack systems everywhere.\u003c\/p\u003e\n\u003ch3\u003eScale Selector\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eUse the scale selector knob to\u003cbr\u003echoose the octave range of the\u003cbr\u003eribbon controller. + values represent\u003cbr\u003ea slide from left to right, and – values\u003cbr\u003erepresent a slide from right to left.\u003c\/p\u003e\n\u003ch3\u003eTwo-Touch Control\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe RBN-1-C supports two\u003cbr\u003esimultaneous touch inputs from the\u003cbr\u003eRBN-1. When a single finger touches\u003cbr\u003ethe ribbon, the left ( ) output is active.\u003cbr\u003eIf a second finger touches the ribbon\u003cbr\u003ewhile the first remains in contact, the\u003cbr\u003eright ( ) output is activated for the\u003cbr\u003esecond touch.\u003c\/p\u003e\n\u003ch3\u003eOutputs\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eGATE\u003cbr\u003eOutputs 5V gate signal while finger is\u003cbr\u003ein contact with ribbon. A solid red LED\u003cbr\u003eindicates output is active.\u003cbr\u003eCV\u003cbr\u003eOutputs 1V\/oct signal based on finger\u003cbr\u003eposition on ribbon. Use the Scale\u003cbr\u003eControl above to choose the octave\u003cbr\u003erange of the ribbon.\u003c\/p\u003e\n\u003ch3\u003eAbsolute \/ Relative\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eABSOLUTE\u003cbr\u003eWhen ribbon is pressed, CV value\u003cbr\u003ejumps to absolute value based on\u003cbr\u003eposition of finger (with the left-\u003cbr\u003emost large marking being zero).\u003cbr\u003eRELATIVE\u003cbr\u003eWhen ribbon is pressed, CV value\u003cbr\u003estarts at zero based on position\u003cbr\u003eof finger.\u003c\/p\u003e\n\u003ch3\u003eRecord and Loop\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eRECORD\u003cbr\u003ePress the button once to arm the\u003cbr\u003erecording. A slow flashing red LED\u003cbr\u003eindicates recording is armed. Recording\u003cbr\u003ebegins when ribbon is pressed, and\u003cbr\u003estops when ribbon is released.\u003cbr\u003ePLAYBACK\u003cbr\u003eIn HOLD ON mode playback will start\u003cbr\u003eautomatically, in HOLD OFF mode press\u003cbr\u003ethe button once to start playback.\u003cbr\u003ePlayback will loop continuously, to stop\u003cbr\u003eand start playback press the button.\u003cbr\u003ePLAYBACK (WITH TRIG INPUT)\u003cbr\u003eWhen a trig input is detected, playback\u003cbr\u003ewill begin when a rising edge signal\u003cbr\u003eis received and will restart at the next\u003cbr\u003erising edge signal. To stop playback\u003cbr\u003epress the button once.\u003cbr\u003eOVERWRITE\u003cbr\u003ePress and hold the button for 0.5\u003cbr\u003eseconds to arm recording again and\u003cbr\u003eoverwrite current recording.\u003c\/p\u003e\n\u003ch3\u003eRBN-1 Input\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eConnect your RBN-1 ribbon controller\u003cbr\u003ehere. A solid green LED in the loop\u003cbr\u003esection indicates the RBN-1 is detected\u003cbr\u003eand RBN-1-C is ready to use. A solid\u003cbr\u003ered LED in the loop section indicates no\u003cbr\u003eRBN-1 detected.\u003c\/p\u003e\n\u003ch3\u003eRibbon input\u003c\/h3\u003e\n\u003cp\u003e• 3.5mm TRS jack socket compatible with UDO RBN-1\u003cbr\u003e• 5k-25k input resistance compatibility range\u003cbr\u003e• Tip - wiper input, Shield - ground, Ring - ribbon supply voltage\u003c\/p\u003e\n\u003ch3\u003eLoop trigger input\u003c\/h3\u003e\n\u003cp\u003e• 3.5mm TS jack socket\u003cbr\u003e• 0\/5V logic level, trigger on rising edge\u003cbr\u003e• High input impedance with weak pull-down (\u0026gt;10k)\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCV outputs\u003c\/h3\u003e\n\u003cp\u003e• 3.5mm TS jack sockets\u003cbr\u003e• 1V\/octave scaling\u003cbr\u003e• Maximum +\/-8mV zero-point error\u003cbr\u003e• Maximum +\/-8mV full-scale error\u003cbr\u003e• Protected against output short circuit to ground (only one channel at a time)\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eGate outputs\u003c\/h3\u003e\n\u003cp\u003e• 3.5mm TS jack sockets\u003cbr\u003e• 0\/5V logic level, active high\u003cbr\u003e• Protected against output short to ground with 1k 250mW series resistors\u003cbr\u003e• LED per channel, illuminated red when corresponding gate output active\u003c\/p\u003e","brand":"UDO AUDIO","offers":[{"title":"Default Title","offer_id":44913714888877,"sku":null,"price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/3449\/7197\/files\/Screenshot2025-09-15at1.48.21PM_3ef2b34a-f975-419a-b8ad-4c2d02b1c55e.png?v=1757965687","url":"https:\/\/www.detroitmodular.live\/products\/udo-rbn-1-c-eurorack-interface-for-rbn-1","provider":"Detroit Modular","version":"1.0","type":"link"}